FLOOR LAMP NEWTON

How to care for lighting with glass, marble, granite, agate and ceramic

We recommend following a few simple guidelines to keep your luxury lighting beautiful for as long as possible. Before cleaning a lamp, make sure you unplug the power cord. Always make sure sprays and liquids do not touch the lamp fittings.

Cleaning & maintenance

For general cleaning, periodically dust your lamp with a feather duster or a soft clean cloth, preferably weekly.

Marble, granite & agate

Use lukewarm water and some mild soap to clean marble, granite, and agate. Gently wipe the surfaces with a soft, dampened cloth or chamois. Dry thoroughly with a clean, soft cloth. Never use cleaners with acid, ammonia, bleach, or hard chemicals and avoid paper towels and scouring pads.

Marble

Clean ceramic with lukewarm water, a pH-neutral sulfate-free cleaner, and a soft sponge or wash cloth. Avoid loofahs, scrub brushes, and other materials that may scratch the surface. If the ceramic surface is grooved, use a soft brush to dislodge dirt from the recesses. Rinse well with clean water. After washing, dry the surface with a soft cloth or chamois.

Glass

Never use abrasive materials for cleaning glass as these can cause scratches. Use suitable glass cleaning products and a microfiber cloth. If you use a chemical cleaner, be careful not to spill it on any of the surrounding finishes. After drying with a soft cloth, you can use a piece of crumpled newspaper to give the glass added sparkle and shine.

Acrylic

Avoid commercial household cleaners as the chemicals in these products can dull and scratch the acrylic. The best way to care for acrylic surfaces, rods, and parts is to clean with lukewarm water and a dash of liquid soap. Rinse with clear water and dry completely. Always use soft cloths for cleaning so you don't scratch the acrylic.

Specifications

General info

Antique brass finish | white marble

Alabaster

Extra info

Including off-white shade

Lamp holder

E27

Lamp holder qty

1

Light bulbs included

Not included

Voltage

220 - 240 Volt

Plug type

F - Schuko plug

Fabric composition shade

100% linen

Shade dimensions

45 x 22 x H. 23 cm

Indoor/outdoor

Indoor use/dry locations only

How to care for lighting with a metallic finish and glass or acrylic

To maintain the beauty of your luxury lighting, we recommend the following simple guidelines. When cleaning a lamp, make sure you unplug the power cord first. Always make sure sprays or liquids can not get in the lamp fittings.

Cleaning & Maintenance

For general maintenance, periodically dust off your lighting with a feather duster or a soft clean cloth, preferably weekly.

Metallic finishes

Use lukewarm water with a mild household detergent to clean metal finishes. Gently wipe the metallic surfaces, rods and parts with a soft, dampened cloth or chamois. Dry well with a clean, soft cloth. Never use cleaners with ammonia, bleach or hard chemicals and avoid paper towels or scouring pads.

Glass

Never use abrasive materials for cleaning glass as they may cause scratches. Use appropriate glass cleaning solutions and a microfiber cloth. If you are using a chemical cleaner, take care not to spill it on any of the surrounding metallic finishes. After drying with a soft cloth, you can use a piece of crumpled newspaper to give the glass added shine and sparkle.

Acrylic

Avoid commercial household cleaners because the chemicals in these products can dull and craze the acrylic. The best way to care for acrylic surfaces, rods and parts, is to clean with lukewarm water and a bit of liquid soap. Rinse with clear water and dry well. Always use soft cloths for cleaning as not to scratch the acrylic.